Zapestnica TNT: Netkana polipropilenska tkanina za ojačanje vodoodpornih membran
Armband TNT
Non-woven polypropylene fabric for the reinforcement, during the application phase, of liquid waterproofing membranes. ARMABAND TNT can be applied both horizontally and vertically, on all surfaces to be waterproofed that are potentially subject to deformation and settlement, or when the risk of cracking is greater. Its use minimizes the risk of the formation of microcracks and cracks which can compromise the seal of the membrane. Particularly suitable for use in the overlaps between the wall and the floor or in potential critical points.
Improves the tensile and puncture resistance of liquid waterproofing systems
It improves the elastic and mechanical characteristics of the waterproofing products in which it is inserted
Good elasticity: significantly increases elongation at break and crack-bridging power
It distributes tensile forces over a larger surface area, significantly reducing the risk of cracking
Anti-alkaline fabric, does not decompose, resists temperature variations
Ideal for surfaces with irregular geometries, easy to cut and shape as needed to treat single and particular points
Lightweight and easy to install product
Resistant to acids and alkaline solutions
Longitudinal and transversal tensile strength; permeable to water, steam and air.
Elastic armor of liquid waterproofing membranes
Application both horizontally and vertically on roofs, terraces, flat roofs, balconies, roofs, walls, tubs, tanks, swimming pools, floors etc.
Reinforcement of the waterproofing layer in critical points such as edges, joints, cracks, corners, horizontal-vertical connections.
Prepare the support surfaces as indicated in the technical data sheets of the liquid waterproofing products that will impregnate ARMABAND TNT.
Prepare the rolls according to the surface to be treated. For specific applications it is possible to easily cut and shape the product with scissors, blade or cutter.
Apply the chosen waterproofing product in the indicated and recommended thickness to the center of the connection or critical point to be treated, then lay ARMABAND TNT by compressing it with a metal bubble-breaking roller, a trowel or a smooth spatula, checking that the non-woven fabric is completely embedded in the membrane and ensuring perfect wetting. For perimeter applications, on floor-wall or wall-wall connections, position ARMABAND TNT symmetrically to cover the corner, drowning the strip in the waterproofing product.
Wait for the first layer of applied product to dry completely, then proceed with the application of the second uniform coat to completely cover the ARMABAND TNT non-woven fabric. Overlaps between two different strips must be carried out with an overlap of no less than 5 cm.
In case of rain between the application of the first and second coat, allow the non-woven fabric to dry completely before applying the second layer.
Packaging: Roll of 50 m
UM: €/m